[Date Prev][Date Next]
[Chronological]
[Thread]
[Top]
Re: [PSUBS-MAILIST] New Design
Hi Harry, Looks awesome. You may want to flip flop
your MBTs and AIR BOTTLES though, So the flotation is
on top and the heavier tanks are on bottom.
That's an expensive plexi dome to be covering up the
view with a cowling? You will also need a hinge back
there. But there is no reason to build one of these
things if you don't build it the way you like it.
--- Original Message ---
From: "Harry Spillett" <harry.spillett@bigfoot.com>
To: "PSUBS Mailing List \(E-mail\)"
<personal_submersibles@psubs.org>
Subject: [PSUBS-MAILIST] New Design
>Hi guys,
>
>I have just sent the first =93block diagram=94 of my
sub design to
>http://www.prismnet.com/~moki/subfiles.html
><http://www.prismnet.com/~moki/subfiles.html> I
would be grateful if you
>could take a look and let me know what you think.
>
>I intend it to be a shallow diving 1 atm craft. So
far I have spent more
>time on researching the ins and out of the internal
systems such as
>buoyancy, electrical and life support, than I have on
the number crunchin=
>g
>required to design the hull.
>
>As you can see from these picture while it may appear
to have an
>unconventional appearance it is essentially a
combination of fundamental
>principles. I.e. the pressure hull is cylindrical
with hemispherical end
>caps. The free flooding fairing is purely to
streamline the external hull
>fittings.
>
>Anyway, what do you think? I can go into more detail
off group if people
>would like to see more.
>
>Thanks,
>
>(the .jpg is called gator 4)
>
>Harry