[Date Prev][Date Next]
[Chronological]
[Thread]
[Top]
Re: Fw: [PSUBS-MAILIST] SUBSAFE
> X-ray is not all that expensive, in the western U.S. you could expect to pay
> about $300. to shoot both of the end caps on 36" pipe. The branch weld can't
> be shot if it's a 36" on 36", but it can be if it's a 36" in 36". Thats's
> assuming you take the vessel to the lab, otherwise, add travel time both
> ways @ their rate, approx. $80 - $90
All welds on the main pressure hull of CSSX a x-ray (and ultasonic..,
and coulor tested..).
I want to go to 250 meter deep (820 feet) with a security factor of 2.
(collapse 1640 feet)
I have here all the films (kodac x-ray film) under my pillow - I check
them myself
a half day - I sleep very well know.
I just have in my contract with the boiler company that they are
responsible
for there weldings in anyway. They payed the x-rays..
Homebuild and professional - not equal on different sides..
Good night here in Europe - Carsten
(John, Stan, Vance - I have a new computer - lost your adress - can you
send me a short mail ?)