[Date Prev][Date Next] [Chronological] [Thread] [Top]

Re: [PSUBS-MAILIST] Underwater Anchor System



Well I'll tel you wouldnt want it..It would definantly get hung up on
something and you'd be stuck there.
To decide when to  bail out.and leave your nice sub   ..not a good idea at
all as far as i'm concerned
            regards john maynard








----- Original Message -----
From: Eliezer Rodriguez <eliezer_rodriguez@hotmail.com>
To: <personal_submersibles@psubs.org>
Sent: Friday, October 19, 2001 11:05 AM
Subject: RE: [PSUBS-MAILIST] Underwater Anchor System


> Well basicly yes, that is possible. But I'm afraid that water could also
> penetrate the motor as most winches I have seen are not waterproof. Also
> esteticly it will be nicer to have the whole system hidden for the
exception
> of the anchor. As they say that an image tell more than words can so, I
> attached a gif file with the idea.
>
> Thanks for the input Rob,
>
> Eliezer Rodriguez
> "The only thing in life to fear is fear itself."
>
>
>
> >From: "Rob Bell" <rbell@fidnet.com>
> >Reply-To: personal_submersibles@psubs.org
> >To: <personal_submersibles@psubs.org>
> >Subject: RE: [PSUBS-MAILIST] Underwater Anchor System
> >Date: Fri, 19 Oct 2001 09:50:39 -0500
> >
> >HI, this is my first post.  But I would imagine that the whole rig could
> >be kept outside the hull. Operate it by remote or radio.
> >
> >Rob
> >
> >-----Original Message-----
> >From: owner-personal_submersibles@psubs.org
> >[mailto:owner-personal_submersibles@psubs.org] On Behalf Of Eliezer
> >Rodriguez
> >Sent: Friday, October 19, 2001 8:07 AM
> >To: PSUBS Group
> >Subject: [PSUBS-MAILIST] Underwater Anchor System
> >
> >
> >Hi;
> >
> >It will be quite interesting to have an underwater anchor system to
> >maintain the position of the sub especially underwater and in strong
> >current conditions The idea is like this, use an electric 12v winch for
> >the system with a remote controll to power in, out and free wheel.This
> >system will be for a sub that goes no more than 150 feet deep and will
> >prevent from currents slamming your sub to underwater cliffs or rocky
> >walls. The only problem I forsee is, how do you prevent the water from
> >going in? Does a kind of lip seal surrounding the cable would do? Any
> >inputs will be welcomed.
> >
> >Regards,
> >
> >Eliezer Rodriguez
> >"The only thing in life to fear is fear itself."
> >
>
>
> _________________________________________________________________
> Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
>