Re: [PSUBS-MAILIST] Locations List

["Gregory Snyder" <snyde032@tc.umn.edu>]

good job john - thanks for the effort.
Sincerely,
Greg
----- Original Message -----
From: John R. Farrington <jrf@austin.ibm.com>
To: <personal_submersibles@psubs.org>
Sent: Thursday, August 16, 2001 1:50 PM
Subject: [PSUBS-MAILIST] Locations List


>
> Here is a first attempt at the "Locations List".  I pulled
> out all info like phone numbers and such, so I hope this
> makes it OK to post to the entire group, instead of to
> the individual members that responded.  (Everyone's e-mail
> address is already in the archives, so this isn't really
> new info here, other than people's locations).  If you
> want someone's phone number, you'll have to e-mail them
> directly for it.
>
> If you want your info added, changed, or removed, please
> e-mail me directly at "jrf@austin.ibm.com".  Once again,
> please do not simply reply to this note, as it will
> end up going to everyone, send a *new* message to me.
>
> We can either put up a web page with this info, or simply
> post a message once a month or so so it'll be in the
> archives if someone wants to find it.
>
> Enjoy!
>
> -John Farrington
>  jrf@austin.ibm.com
>
>
> --------------------------------------------
> ------- Locations List: Aug 16, 2001 -------
> --------------------------------------------
>
>
> ---------- North-East USA ----------
> Matt Cadieux
> compkid15@earthlink.net
> Westport, Massachusets, USA
>
> Lew Clayman
> lew_clayman@yahoo.com
> Rockville, Maryland, (near Washington DC), USA
>
> Dan Hryhorcoff
> machine@epix.net
> Scranton, Pennsylvania, USA
>   After about fifteen years of getting around to it,
>   I'm building a K-350.
>
> Michael B. Holt
> mholt@richmond.edu
> Richmond, Virginia, USA
>
> Max Kruschka
> catbreath444444@aol.com
> Northern Virginia, USA
>
>
> ---------- South-East USA ----------
> Brad Mallard
> bradmallard@hotmail.com
> Savannah, Georgia, USA
>   BS in Metallurgical Engineering (expert in welding & metals)
>   Planing to build within the next couple of years.
>   Design Engineer
>
> Vance Bradley
> VBra676539@aol.com
> Port St. Lucie, FL
>
> Stan Freihofer
> SFreihof@aol.com
> Fort Lauderdale, FL
>   I am building an ambient pressure dry sub, currently on hold until I can
>   arrange better facilities for construction.
>
>
> ---------- North-Central USA ----------
> Karl S. Luttrell
> SDECO@prodigy.net
> Ann Arbor, Michigan, USA
>
> Greg Snyder
> snyde032@tc.umn.edu
> Minneapolis, Minnesota, USA
>
> David Buchner
> buchner@wcta.net
> Central Minnesota, USA
>
> Greg Cotton
> gregc02@attglobal.net
> Minneapolis, Minnesota, USA
>   I'm an ex Navy Sub sailor, both Diesel and Nuke 1965-69.
>   I've been looking at Psub designs since Jr. High.
>   I hope to build at least an ambient/dry design in the next
>   couple of years.
>
>
> ---------- South-Central USA ----------
> John Farrington
> jrf@austin.ibm.com
> jrf@prismnet.com
> Austin, TX USA
> Building a K-350 with my girlfriend Monica
>
>
> ---------- West-Coast USA ----------
> Ray Keefer
> ray.keefer@sun.com
> Portland, Oregon, USA
>
> Ed Greany
> Crest25@attglobal.net
> Corona, California, (near Disneyland), USA
>   Former submariner and sonarman on USS Will Rogers.
>   I have a sub design I did while on the boats that is dated 1967. Never
>   built it as I was always thought of as excentric and nuts for
>   considering it. I am interested in subs, and if I can even get the wife
>   to concede, I'd like to build one.
>
> James Warner
> james@whototake.com
> Southern California, near Disneyland, USA
>
>
> ---------- Ontario, Canada ----------
> Adam
> adamnr@netrover.com
> Ontario, Canada
> A little more than an hour from the Ambassador.
>   Status: Design
>
>
> ---------- Europe ----------
> Dylan Powell
> dylan.powell@tkn.org.uk
> Newport, South Wales in the UK
>   I am planning (or is it more like hoping) to build a personal sub.
>
> Harry Spillett
> harry.spillett@bigfoot.com
> Surrey, England
>   I have chosen my "ideal" design and am now exploring every
>   aspect to ensure I am not inventing the wheel or skimping on safety etc.
>
> Carsten Standfuss
> Merlinsub@t-online.de
> Germany
> The original sub-madman.
> (Sorry Carsten, I just had to say it)
>
>