[Date Prev][Date Next] [Chronological] [Thread] [Top]

[PSUBS-MAILIST] Locations List




Here is a first attempt at the "Locations List".  I pulled
out all info like phone numbers and such, so I hope this
makes it OK to post to the entire group, instead of to
the individual members that responded.  (Everyone's e-mail
address is already in the archives, so this isn't really
new info here, other than people's locations).  If you
want someone's phone number, you'll have to e-mail them
directly for it.

If you want your info added, changed, or removed, please
e-mail me directly at "jrf@austin.ibm.com".  Once again,
please do not simply reply to this note, as it will
end up going to everyone, send a *new* message to me.

We can either put up a web page with this info, or simply
post a message once a month or so so it'll be in the
archives if someone wants to find it.

Enjoy!

-John Farrington
 jrf@austin.ibm.com


--------------------------------------------
------- Locations List: Aug 16, 2001 -------
--------------------------------------------


---------- North-East USA ----------
Matt Cadieux
compkid15@earthlink.net
Westport, Massachusets, USA

Lew Clayman
lew_clayman@yahoo.com
Rockville, Maryland, (near Washington DC), USA

Dan Hryhorcoff
machine@epix.net
Scranton, Pennsylvania, USA
  After about fifteen years of getting around to it,
  I'm building a K-350.

Michael B. Holt
mholt@richmond.edu
Richmond, Virginia, USA

Max Kruschka
catbreath444444@aol.com
Northern Virginia, USA


---------- South-East USA ----------
Brad Mallard
bradmallard@hotmail.com
Savannah, Georgia, USA
  BS in Metallurgical Engineering (expert in welding & metals)
  Planing to build within the next couple of years.
  Design Engineer

Vance Bradley
VBra676539@aol.com
Port St. Lucie, FL

Stan Freihofer
SFreihof@aol.com
Fort Lauderdale, FL
  I am building an ambient pressure dry sub, currently on hold until I can 
  arrange better facilities for construction.


---------- North-Central USA ----------
Karl S. Luttrell
SDECO@prodigy.net
Ann Arbor, Michigan, USA

Greg Snyder
snyde032@tc.umn.edu
Minneapolis, Minnesota, USA

David Buchner
buchner@wcta.net
Central Minnesota, USA

Greg Cotton
gregc02@attglobal.net
Minneapolis, Minnesota, USA
  I'm an ex Navy Sub sailor, both Diesel and Nuke 1965-69.
  I've been looking at Psub designs since Jr. High.
  I hope to build at least an ambient/dry design in the next
  couple of years.


---------- South-Central USA ----------
John Farrington
jrf@austin.ibm.com
jrf@prismnet.com
Austin, TX USA
Building a K-350 with my girlfriend Monica


---------- West-Coast USA ----------
Ray Keefer
ray.keefer@sun.com
Portland, Oregon, USA

Ed Greany
Crest25@attglobal.net
Corona, California, (near Disneyland), USA
  Former submariner and sonarman on USS Will Rogers.
  I have a sub design I did while on the boats that is dated 1967. Never
  built it as I was always thought of as excentric and nuts for
  considering it. I am interested in subs, and if I can even get the wife
  to concede, I'd like to build one.

James Warner
james@whototake.com
Southern California, near Disneyland, USA


---------- Ontario, Canada ----------
Adam
adamnr@netrover.com
Ontario, Canada
A little more than an hour from the Ambassador.
  Status: Design


---------- Europe ----------
Dylan Powell
dylan.powell@tkn.org.uk
Newport, South Wales in the UK
  I am planning (or is it more like hoping) to build a personal sub.

Harry Spillett
harry.spillett@bigfoot.com
Surrey, England
  I have chosen my "ideal" design and am now exploring every
  aspect to ensure I am not inventing the wheel or skimping on safety etc.

Carsten Standfuss
Merlinsub@t-online.de
Germany
The original sub-madman.
(Sorry Carsten, I just had to say it)