Re: [PSUBS-MAILIST] An Idea for a PSUB Periscope

["samdatl" <samdatl@avana.net>]

you could make a mold of the cam and cast it then use acrilic resin and
activator to create a perfict fit.    you could mould it to fit flush to
just about anything and shape it to reduce drag and damage from being
bumped.
----- Original Message -----
From: "Chris Horne" <chris@chrishorne.com>
To: <personal_submersibles@psubs.org>
Sent: Sunday, August 06, 2000 9:05 PM
Subject: Re: [PSUBS-MAILIST] An Idea for a PSUB Periscope


> That's what I've been thinking of using, both for a  periscope and for
> my front "glass", since I can't put a hemispherical dome on the front of
> my sub, as it will interfere with the foreward ballast tanks. I haven't
> quite figured out what to house it in, but I'm thinking of a dive light
> housing....
>
> -chris
>
> S W wrote:
>
> > I don't know if anyone has thought of this already,
> > but I was pondering the use of a small digital camera
> > encapsulated in some way, being used as a periscope
> > for a PSUB. Is anyone doing this or thinking about
> > doing it? Could be pretty cool if you did it right.....
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Kick off your party with Yahoo! Invites.
> > http://invites.yahoo.com/