Re: [PSUBS-MAILIST] External frames

[VBra676539@aol.com]

In a message dated 8/5/00 9:03:27 AM, dblake@bright.net writes:

<< Correction:
I said,
"For outside rings, the welds should not be no less than 1/2 the outside 
circumference on 6" centers"
Instead, it should read, 
" ....welds should be no less than 1/2...."
An example for a 36" O.D. hull would be:
1/2 of 36" = 18"
18" /  6" = 3"
so, 6 equally spaced 3"X1/4" beads are sufficient if outside rings are used.

Big Dave >>

The major certifying agencies for subs all require continuous welding, far as 
I know.
Vance