[PSUBS-MAILIST] Subconn OM Connector Primers

[Jon Wallace via Personal_Submersibles]

 Dan Lance did some molding work for DIY cables about 15 years ago and he would be a good resource for some guidance on this topic.  It's probably a topic we should revive at a future conference.
Jon
    On Thursday, January 16, 2025 at 11:03:41 AM EST, Sean Lange via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
 Hi all,I was wondering if anyone has used the subconn OM over-mold connectors. I’m using an OM connector to terminate the ends of my ROV tether. I have limited resin casting experience, and I’ve had some trouble sourcing the 5136 Resin Primer Subconn recommends and I was hoping someone might’ve used an alternative.
- Thanks,Sean Lange
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20250116/6a07cdbf/attachment.html>