[PSUBS-MAILIST] MBT mold

[hank pronk via Personal_Submersibles]

 Rick,That is friggin ingenious !  Hank
    On Thursday, July 4, 2019, 11:39:22 PM MDT, Alan via Personal_Submersibles <personal_submersibles at psubs.org> wrote:  
 
 Rick,that's quite clever. It made sense when I watched the video.If the template edge was smooth enough you could possibly spread the bogwith it & get close to finished.Alan
On 5/07/2019, at 4:29 PM, Rick Patton via Personal_Submersibles <personal_submersibles at psubs.org> wrote:


Download full resolution imagesAvailable until Aug 3, 2019


I finally came up with an idea on how I was going to shape my styrofoam block to lay up the fiberglass on using a hot wire. It worked okay but was hoping for a better end result. I transferred the lines onto another piece of plywood to make a female template so I can now rotate it to see where the high and low spots are.Rick 


<IMG_2028.jpg>





<IMG_2038.jpg>





Click to DownloadIMG_2044.MOV0 bytes




Sent from my iPhone
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190705/fa2d4f3f/attachment.html>