[PSUBS-MAILIST] MBT mold

[Alan via Personal_Submersibles]

Rick,
that's quite clever. It made sense when I watched the video.
If the template edge was smooth enough you could possibly spread the bog
with it & get close to finished.
Alan

> On 5/07/2019, at 4:29 PM, Rick Patton via Personal_Submersibles <personal_submersibles at psubs.org> wrote:
> 
> 
> Download full resolution images
> Available until Aug 3, 2019
> I finally came up with an idea on how I was going to shape my styrofoam block to lay up the fiberglass on using a hot wire. It worked okay but was hoping for a better end result. I transferred the lines onto another piece of plywood to make a female template so I can now rotate it to see where the high and low spots are.
> Rick 
> 
> <IMG_2028.jpg>
> 
> 
> <IMG_2038.jpg>
> 
> 
> Click to Download
> IMG_2044.MOV
> 0 bytes
> 
> 
> Sent from my iPhone
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20190705/cd39035f/attachment.html>