[PSUBS-MAILIST] SeaQuestor pressure hull.

[David Colombo via Personal_Submersibles]

Hi Tim,
The rear pilot position should be 18 + inches. The front pilot without
lifting bag about 12 inches. With lifting bag 18 inches min. At least
that's what the calcs say.  Still working out the details.
David

On Sat, Sep 1, 2018, 10:25 AM T Novak via Personal_Submersibles <
personal_submersibles at psubs.org> wrote:

> Your project is really moving forward at a great clip, David.
>
> Your design is most intriguing.  What amount of freeboard do you expect
> for each cockpit when surfaced?
>
> Tim
>
>
>
> *From:* Personal_Submersibles [mailto:
> personal_submersibles-bounces at psubs.org] *On Behalf Of *David Colombo via
> Personal_Submersibles
> *Sent:* Saturday, September 1, 2018 7:50 AM
> *To:* Personal Submersibles General Discussion <
> personal_submersibles at psubs.org>
> *Subject:* [PSUBS-MAILIST] SeaQuestor pressure hull.
>
>
>
> Hi guys, today was fit up day for the forward sail on the SeaQuestor.
> Scribe the cutout, grind and clean the edges, fit the sail, rinse and
> repeat. Almost got the final opening correct by the end of the day. Mean
> while in the adjacent shop the frame rails were being plasma cnc cut. Next
> week will see a lot of changes.
>
> David
> _______________________________________________
> Personal_Submersibles mailing list
> Personal_Submersibles at psubs.org
> http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20180901/f0667d06/attachment.html>