[PSUBS-MAILIST] SeaQuestor pressure hull.

[T Novak via Personal_Submersibles]

Your project is really moving forward at a great clip, David.

Your design is most intriguing.  What amount of freeboard do you expect for each cockpit when surfaced?

Tim

 

From: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org] On Behalf Of David Colombo via Personal_Submersibles
Sent: Saturday, September 1, 2018 7:50 AM
To: Personal Submersibles General Discussion <personal_submersibles at psubs.org>
Subject: [PSUBS-MAILIST] SeaQuestor pressure hull.

 

Hi guys, today was fit up day for the forward sail on the SeaQuestor. Scribe the cutout, grind and clean the edges, fit the sail, rinse and repeat. Almost got the final opening correct by the end of the day. Mean while in the adjacent shop the frame rails were being plasma cnc cut. Next week will see a lot of changes.

David

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20180901/51abb0c6/attachment.html>