[PSUBS-MAILIST] Pressure Test Chamber

[Hugh Fulton via Personal_Submersibles]

Alan,

I have a deal for you.

I have the cylinder, pump and gauges but need the flanges made etc.

You can use it whenever but I get to keep it.

Hugh

 

 

From: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org] On Behalf Of Alan James via Personal_Submersibles
Sent: Saturday, 14 November 2015 5:37 p.m.
To: Personal Submersibles General Discussion
Subject: [PSUBS-MAILIST] Pressure Test Chamber

 

Hi all,

I need to find or make a test chamber a minimum

of around 6" internal diameter & about 12" high.

I could go a lot larger than that if something was suitable.

I don't need to test above 400 psi.

Anything off the shelf that I could cannibalize?

Or any ideas on construction.

Cheers Alan

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20151115/0c94905b/attachment.html>