[PSUBS-MAILIST] Pressure Test Chamber

[Alan James via Personal_Submersibles]

Thanks Steve,I could take you up on the test offer. I have a daughter in South Yarrawho has just won a 12 day tour of Haiti & is stopping over in Auckland on the way back. Could put a few through hulls in her hand luggage :)Making one up out of pipe flanges & blank ends is looking a really good option.Cheers Alanp.s. I don't follow cricket.

      From: Stephen Fordyce via Personal_Submersibles <personal_submersibles at psubs.org>
 To: Personal Submersibles General Discussion <personal_submersibles at psubs.org> 
 Sent: Saturday, November 14, 2015 7:01 PM
 Subject: Re: [PSUBS-MAILIST] Pressure Test Chamber
   
Hi Alan,
I have one in Melbourne if you want to send things across the ditch - it's about 250mm inside diameter, 800mm long and good to 200m water depth.For making your own you could do it pretty easily enough with standard pipe and flanges, although it will need pressure quality welding.Cheers,
SteveOn 14/11/2015 3:40 PM, "Alan James via Personal_Submersibles" <personal_submersibles at psubs.org> wrote:



Hi all,I need to find or make a test chamber a minimumof around 6" internal diameter & about 12" high.I could go a lot larger than that if something was suitable.I don't need to test above 400 psi.Anything off the shelf that I could cannibalize?Or any ideas on construction.Cheers Alan
_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles



_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20151114/ac3c3fd6/attachment.html>