[PSUBS-MAILIST] MK101 oil compensation tap

[Alan James via Personal_Submersibles]

Jon,the alternative is to follow Hugh's idea that Cliff is using & I am going to test out,& put a regulator in the system that is set it to around 4psi internal overpressure. This means you can fill with oil & not worry about getting everylast drop going in, or drilling the housing. You will also be able to run it air compensated. There is the safety feature that if you leak oil there is plenty of air to replace it.Cliff already has the parts sorted, just put your order in:)Alan
      From: Jon Wallace via Personal_Submersibles <personal_submersibles at psubs.org>
 To: Personal Submersibles General Discussion <personal_submersibles at psubs.org> 
 Sent: Thursday, May 21, 2015 5:47 AM
 Subject: Re: [PSUBS-MAILIST] MK101 oil compensation tap
   

How important is it to get every last air bubble out?  Surely a fraction 
of the total volume is not going to result in catastrophic failure of 
the motor housing, is it?



_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles


  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20150520/206ccc9e/attachment.html>