[PSUBS-MAILIST] minn-kota cabling to hull

[Emile van Essen via Personal_Submersibles]

Jon, 

(resend massage)

Potting is okay but I switched to a pressure proof Delrin/ POM isolator.
Brass contacts are pressed in a Delrin bushing. On the outside sealed with a
0-ring in the thrusters tube. See attachment Main advantage is that it is
dismountable.
BTW. I used the Rhino as they have a all metal construction


Regards, Emile

-----Oorspronkelijk bericht-----
Van: Personal_Submersibles [mailto:personal_submersibles-bounces at psubs.org]
Namens Jon Wallace via Personal_Submersibles
Verzonden: donderdag 16 april 2015 14:07
Aan: Personal Submersibles General Discussion
Onderwerp: [PSUBS-MAILIST] minn-kota cabling to hull


I think Emile had details of potting the minn-kota.  Anyone know where 
this might be located?

Anyone waterproofing their cabling by oil-compensation through a poly 
tube?  If I remember correctly, Aquarius uses this method for the 
electrical wires to the lights and vacuum.

Jon

_______________________________________________
Personal_Submersibles mailing list
Personal_Submersibles at psubs.org
http://www.psubs.org/mailman/listinfo.cgi/personal_submersibles
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Thruster-penetrator.pdf
Type: application/pdf
Size: 9075 bytes
Desc: not available
URL: <http://www.whoweb.com/pipermail/personal_submersibles/attachments/20150422/7867fdec/attachment.pdf>