[Date Prev][Date Next]
[Chronological]
[Thread]
[Top]
Re: Thru hull device
>Scott,
>
>What did you come up with??
>
>Ken Martindale
>
I'm going to use a steel pipe that runs thru the hull, and a threaded
bar with 2 rubber expansion nuts screwed on next to each other and
tightened with washers and nuts. The bar goes inside the steel pipe, and
the more I tighten the nuts, the tighter the seal. The steel pipe is
about 12" long, with the sealling mech. on the end closest to the hull,
that way the rest of the pipe carries the loads from the dive plane. It
seems like it will work just fine, I'll have to test it first to be
sure, but i'm confident.
Thanks again for the help.
Scott Shakespeare
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com