Re: thank you ken

[ARoberts32 <ARoberts32@aol.com>]

Funny how two 30Lb thrust motors cost less than a 60Lb thrust one.


For pressure comp of a trolling motor I was thinking...

take it apart and fill as much of the internal air spaces with a solid..
then have an external bladder of air connected to the motor insides..
if the bladder is 10in cubed and  the motor internal space is 1in cubed then
you can
dive to the point where 11in cubed is compressed to 1in cubed..
pretty deep..
You also loose 10in cubed of bouyancy.....  
 
nothins perfect..

Mike Roberts