This may seem a bit counter-intuitive, but the
best place to drill holes
in stiffeners, if one must, is actually
through the stiffener web.
Stiffeners work by increasing the
local moment of inertia in
consideration of the stiffener plus an
effective length of the shell to
which it is welded. The
outstand (stiffener flange) actually makes the
greatest
contribution to this moment, as compared to material within
the
web which is close to the neutral axis of the combined
section. Small
holes are unlikely to make a huge
difference, but assuming you have a T
shaped stiffener, is it
possible to clamp to the flange without drilling
at
all?
-Sean
On 2012-05-28 02:49, James Frankland
wrote:
Hi All,
Am i ok to drill holes in my
reinforcement ribs? They would be about
8mm in the top
part of the "T". Just a few here and there to hold
pipes.
I've finished most of the high pressure plumbing but
i need to hold
the pipes down. I didnt really want to
drill into the ribs as it
means more painting, but ive scraped
the paint off in places while
working so i have to re-do bits
anyway.
The other options are to weld tabs on, or use some
brackets of some
sort, but i think easiest is just to bolt
through and re
paint.
Thanks
James
************************************************************************
************************************************************************
************************************************************************
The
personal submersibles mailing list complies with the US
Federal
CAN-SPAM Act of 2003. Your email address appears in
our database
because either you, or someone you know, requested
you receive messages
from our organization.
If you want to
be removed from this mailing list simply click on the
link below
or send a blank email message to:
removeme-personal_submersibles@psubs.org
Removal
of your email address from this mailing list occurs by
an
automated process and should be complete within five minutes
of
our server receiving your request.
PSUBS.ORG
PO Box 53
Weare, NH
03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************
******************************
******************************
************
******************************
******************************
************
******************************
******************************
************
The
personal submersibles mailing list complies with the US
Federal
CAN-SPAM Act of 2003. Your email address appears in
our database
because either you, or someone you know, requested you
receive messages
from our organization.
If you want to be
removed from this mailing list simply click on the
link below or
send a blank email message to:
removeme-personal_submersibles@psubs.orgRemoval
of your email address from this mailing list occurs by an
automated
process and should be complete within five minutes of
our server
receiving your request.
PSUBS.ORGPO Box
53
Weare, NH
03281
603-529-1100
******************************
******************************
************
******************************
******************************
************
******************************
******************************
************