Hi James, The HP port of a first
stage has for safety reason a very small ofrice so a very limited flow. For
blowing tanks I use a LP port from an outside tank. For HP I use a DIN
(5/8”BSP) scuba overfill hose . The DIN goes in the tank and if you dissemble
the other end, you find 7/16”UNF thread This thread uses Swagelok
also for its 6 mm tube fittings J Emile Van:
owner-personal_submersibles@psubs.org
[mailto:owner-personal_submersibles@psubs.org] Namens James Frankland Hi All, Starting on my plumbing. Got most of it sorted but have a
fundamental problem. Im not sure how to get the scuba tank(s) connected into the
system. Its all swagelock, either 1/4 or 1/2 inch. I assume most people would use a flexible hose from either the high
pressue port on a scuba stage 1 or directly from a D link onto the tank.
But how to get that hose into the swagelock system. Is there some sort of
adapter or do i have to make a manifold that i can screw the end of the hose
into one end, and a swagelock fitting on the other? Off to my local tech diving shop in a moment so they may have some
answers. WHat has everyone else done?? Geen virus gevonden in dit bericht. |