[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PSUBS-MAILIST] steel to aluminum

To: personal_submersibles@psubs.org
Subject: Re: [PSUBS-MAILIST] steel to aluminum
From: vbra676539@aol.com
Date: Sat, 29 Oct 2011 10:12:10 -0400 (EDT)
In-reply-to: <CA+2Aca2QBvUoPZG6zKEmnPYnKF5F1zHOFSSt0=eJPjfj+=9i5g@mail.gmail.com>
References: <CA+2Aca2QBvUoPZG6zKEmnPYnKF5F1zHOFSSt0=eJPjfj+=9i5g@mail.gmail.com>
Reply-to: personal_submersibles@psubs.org
Sender: owner-personal_submersibles@psubs.org

Sure. It isn't new. I don't know anything about it beyond the fact that it can be done. Sounds expensive, though, doesn't it?

Vance

-----Original Message-----
From: ojaivalleybeefarm @dslextreme.com <ojaivalleybeefarm@dslextreme.com>
To: personal_submersibles <personal_submersibles@psubs.org>
Sent: Sat, Oct 29, 2011 6:03 am
Subject: [PSUBS-MAILIST] steel to aluminum

Has anyone ever heard of this ?

http://www.pacaero.com/products/explosive-welding-metals.htm

Brian

Follow-Ups:
- Re: [PSUBS-MAILIST] steel to aluminum
  - From: "ojaivalleybeefarm @dslextreme.com" <ojaivalleybeefarm@dslextreme.com>

References:
- [PSUBS-MAILIST] steel to aluminum
  - From: "ojaivalleybeefarm @dslextreme.com" <ojaivalleybeefarm@dslextreme.com>

Prev by Date: Re: [PSUBS-MAILIST] Kittredge Motor Housing help
Next by Date: Re: [PSUBS-MAILIST] Kittredge Motor Housing help
Previous by thread: [PSUBS-MAILIST] steel to aluminum
Next by thread: Re: [PSUBS-MAILIST] steel to aluminum
Index(es):
- Date
- Thread