[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PSUBS-MAILIST] Regulators



I just want to second the endorsement of Apeks SCUBA regulators.  I have used many different makes and models over the years, and the Apeks are the only ones I never regretted purchasing.  I have several DS4's and a couple of the newer ones, and will no longer buy anything else.

-Sean


On 30/12/2010 12:15 PM, Emile van Essen wrote:

Hugh,

 

You mean the dive tank regulators right ?

They reduce the pressure to about 10 Bar over ambient. If you have them inside, You cannot blow tanks when you are deeper than 100 Metres (=10 Bar)

So better store tanks an regulators outside on a 1ATM sub.

For oxygen no difference but store outside saves room inside…

 

I Like the Apeks DS1 or DS4  but any rugged and common regulator will do the job.

 

Emile

 


Van: owner-personal_submersibles@psubs.org [mailto:owner-personal_submersibles@psubs.org] Namens Hugh Fulton
Verzonden: donderdag 30 december 2010 20:53
Aan: personal_submersibles@psubs.org
Onderwerp: [PSUBS-MAILIST] Regulators

 

Placement of regulators and choice of them.

For Air and oxygen.  Is it best to have the regulators inside or outside the pressure hull?  I noticed that some have the regs outside and others inside.

What brand/models have people found the best?  Hugh



__________ Information from ESET NOD32 Antivirus, version of virus signature database 5743 (20101229) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com


Geen virus gevonden in dit bericht.
Gecontroleerd door AVG - www.avg.com
Versie: 10.0.1191 / Virusdatabase: 1435/3348 - datum van uitgifte: 12/30/10