[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PSUBS-MAILIST] speedo



Hi David,
You've got me thinking on this speed indicator idea.
On my projects page is the "Position sensor". I'm using a rotary magnetic potentiometer,
but there is a linear magnetic potentiometer shown also.
You could have a slider over the top of the linear potentiometer, with a vane that is pushed
by water movement against a spring. The vain portion has the magnet & as it slides further
along the potentiometer it changes the voltage wich is registered on the circuitry also on
my projects page. You could have the speed indicated by the LEDs as is, or output to a
panel meter. This could be calibrated in a swimming pool by either adjusting the spring size
or tension, the size of the vain, or by adjusting the display range with the pots on the circuit board.
Regards Alan
 
 
----- Original Message -----
Sent: Sunday, October 31, 2010 10:10 PM
Subject: [PSUBS-MAILIST] speedo

Can anyone describe how a speedo speed indicator system works and would such a system be suitable for small submarines? Is'nt such a system deployed on the R-300 Cliff?
 
David Bartsch