RE: [PSUBS-MAILIST]test went well

Kyle that would be fantastic that’s the one I was looking for we can either do it on line or by regular mail let me know which is the easiest for you

Thank you

Brian V. Ryder

brian@subatlantic.com

CONFIDENTIALITY NOTICE: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information or otherwise be protected by law. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message.

From: owner-personal_submersibles@psubs.org [mailto:owner-personal_submersibles@psubs.org] On Behalf Of Kyle
Sent: Friday, June 11, 2010 12:47 AM
To: personal_submersibles@psubs.org
Subject: RE: [PSUBS-MAILIST]test went well

Brian,

I have a 1979-80 edition with photos that I can scan on Monday. Let me know if you need them.

Kyle

-----Original Message-----
From: owner-personal_submersibles@psubs.org [mailto:owner-personal_submersibles@psubs.org]On Behalf Of Brian V. Ryder
Sent: Thursday, June 10, 2010 3:53 PM
To: personal_submersibles@psubs.org
Subject: RE: [PSUBS-MAILIST]test went well

Thanks everyone its exiting to get it in the water, I agree it is very tough getting the weight right and buoyancy as far as surface stability goes, lots of adding and subtracting here and submerge and learn all over again but it is fun, I do see lots of things I would do different next time but that’s always the way, working now on trying to reduce the weight of the whole sub so we will have it back in the water tomorrow trying a few different configuration, lucky I have a crane on board it makes it much easier to make all the changes, I think my personal boat will be similar to bionic guppy I really like the look Jim did you design it yourself or where there plans that you modified, I hope to be able to do the deep water test in around 10 days it’s a little tougher we have to steam 15 hours from Boston to find a 1000 foot deep hole, so let’s see sea hunter get 6 gallons per mile, 165 miles so 990 gallons each way, then beer after, all I can say is it’s much easier spending someone else’s money .

One question I have does anyone have a Jane’s that list PRV2 in it Mike C said he thinks he does but he’s so busy I don’t think he’s located it yet and if so would it be possible to photo copy the info just for my records I would greatly appreciate it

Hey and a thought for the next convention how about a submarine poker run (-: or 100 meter speed runs surfaced and submerged ?

Regards

Brian V. Ryder

brian@subatlantic.com

CONFIDENTIALITY NOTICE: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information or otherwise be protected by law. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message.

From: owner-personal_submersibles@psubs.org [mailto:owner-personal_submersibles@psubs.org] On Behalf Of vbra676539@aol.com
Sent: Wednesday, June 09, 2010 8:34 PM
To: personal_submersibles@psubs.org
Subject: Re: [PSUBS-MAILIST]test went well

Good going, Brian and team. Congratulations.

Vance

-----Original Message-----
From: Brian V. Ryder <brian@subatlantic.com>
To: personal_submersibles@psubs.org
Sent: Wed, Jun 9, 2010 5:16 pm
Subject: RE: [PSUBS-MAILIST]test went well

Well a floats added some foam and removed some lead and it floats with no leaks still lots of work to do

Brian V. Ryder

brian@subatlantic.com

CONFIDENTIALITY NOTICE: This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information or otherwise be protected by law. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message.