Re: [PSUBS-MAILIST] Launch Procedure

[MerlinSub@t-online.de]

First close the hatch.. 
than flood the soft tanks. Than the hard tanks. 

Mark the reach waterline level on the outer hull or sail. 

Than blow out both tanks groups and add fix ballast according to 
the volume which was still out of the water and start again.. 

;-) vbr Carsten 


"kocpnt tds.net" <kocpnt@tds.net> schrieb:
> Hi All,
> 
> I think I am getting a better handle on ballasting and I intend to get the
> sub out this weekend for some more testing.
> 
> Please let me know if I am understanding this right.
> 
> I plan on first flooding the soft tanks. After they are flooded I will let
> just enough water into the hard tanks to become neutral, then shut the
> valve.
> 
> Does this make sense to some of you with more experience?
> 
> Best Regards,
> 
> Jim K
> 




************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003.  Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.

If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
	removeme-personal_submersibles@psubs.org

Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of
our server receiving your request.

PSUBS.ORG
PO Box 53
Weare, NH  03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************