[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PSUBS-MAILIST] Launch Procedure

To: personal_submersibles@psubs.org
Subject: [PSUBS-MAILIST] Launch Procedure
From: "kocpnt tds.net" <kocpnt@tds.net>
Date: Fri, 21 May 2010 15:19:21 -0500
Reply-to: personal_submersibles@psubs.org
Sender: owner-personal_submersibles@psubs.org

Hi All,

I think I am getting a better handle on ballasting and I intend to get the sub out this weekend for some more testing.

Please let me know if I am understanding this right.

I plan on first flooding the soft tanks. After they are flooded I will let just enough water into the hard tanks to become neutral, then shut the valve.

Does this make sense to some of you with more experience?

Best Regards,

Jim K

Follow-Ups:
- Re: [PSUBS-MAILIST] Launch Procedure
  - From: vbra676539@aol.com
- RE: [PSUBS-MAILIST] Launch Procedure
  - From: "Smyth, Alec" <Alec.Smyth@compuware.com>

Prev by Date: RE: [PSUBS-MAILIST] Fort Pierce - Boat Ramp
Next by Date: Re: [PSUBS-MAILIST] Launch Procedure
Previous by thread: RE: [PSUBS-MAILIST] kort nozzels
Next by thread: Re: [PSUBS-MAILIST] Launch Procedure
Index(es):
- Date
- Thread