Ah, I think I see. But what length hulls do these numbers apply to? -----Original Message----- From: owner-personal_submersibles@psubs.org [mailto:owner-personal_submersibles@psubs.org] On Behalf Of ShellyDalg@aol.com Sent: Wednesday, May 12, 2010 11:59 To: personal_submersibles@psubs.org Subject: Re: [PSUBS-MAILIST] pressure hull sizing In a message dated 5/11/2010 1:13:51 P.M. Pacific Daylight Time, MerlinSub@t-online.de writes: 22" is 0,5 ts, 39" is 1,6ts, 47" is 2,4 ts and 98" is around 60ts.. vbr Carsten <vbra676539@aol.com> schrieb: > > If you are going to sit upright, then 30" is plenty. For moving around, 36" is minimal. 42" is pretty good, 48" is workable and 54" is nearly luxurious. > Vance 84 inch diameter with 52 inch inside height = 6850 pounds for Git Kraken. Heavy but still able to pull behind a truck. Frank D.
Attachment:
smime.p7s
Description: S/MIME cryptographic signature