Re: [PSUBS-MAILIST] pressure hull sizing

[ShellyDalg@aol.com]

In a message dated 5/11/2010 1:13:51 P.M. Pacific Daylight Time, MerlinSub@t-online.de writes:

22" is 0,5 ts, 39" is 1,6ts, 47" is 2,4 ts and 98" is around 60ts..
vbr Carsten

<vbra676539@aol.com> schrieb:
>
> If you are going to sit upright, then 30" is plenty. For moving around, 36" is minimal. 42" is pretty good, 48" is workable and 54" is nearly luxurious.
> Vance

84 inch diameter with 52 inch inside height = 6850 pounds for Git Kraken.

Heavy but still able to pull behind a truck.

Frank D.