Re: [PSUBS-MAILIST] acrylic dome

[Jon Wallace <jonw@psubs.org>]

Alan,

Your 1600 foot calculation sounds like it might be excessive.  Using 
Stachiw's tables I come up with about 580 to 600 feet which seems to be 
in line with Carstens tables.

Jon



MerlinSub@t-online.de wrote:
> 150 ft : because of the pressure hull, scuba diving capacity of the pilot and in general the lakes here are not deeper.. 
>
> :-0  
>
> To my tables a 20 mm dome with a inside diamter of 560 mm is good for a 
> classification work depth of 650 feet at 24 degree water temp and 500 feet at 38 degree C°
>
> vbr Carsten 
>
>
> "Alan James" <alanjames@xtra.co.nz> schrieb:
>   
> > My pressure program says it should have a crush depth of 1600 ft so why the 
> > sub
> > only goes to 150 ft I don't know.
> > Alan
> >
> >     




************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003.  Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.

If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
	removeme-personal_submersibles@psubs.org

Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of
our server receiving your request.

PSUBS.ORG
PO Box 53
Weare, NH  03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************