[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PSUBS-MAILIST] Mussels



Brent remember you were playing with the idea of inflatable mbt's have you ever thought of a square instead of round shape with a inflatable bladder connected to a plastic flat base plate running the length of the mbt's with stainless steel springs that are connected to the bottom of the plate that once the purge valve of the bladder is opened the force of the springs will collapse the bladder on surfacing will be inflated by closing purge and open compressed air valve which is on the same line could be more rectangular shape to shorten springs any comments welcome
Glensa
----- Original Message -----
Sent: Monday, August 24, 2009 12:41 AM
Subject: RE: [PSUBS-MAILIST] Mussels



Good idea with the anti fouling Glen,  That reminds me of a design I have been working on for doing a freshwater rinse of the interior of the fully floodable wings in my Batic THUWG sub design, and a flying submarine.  I just planning to mount misters and/or sprayers in such a matter as all the internal surfaces would be rinsed off. Frank could install some plumbing inside his tanks to do just that, and use it for a freshwater rinse and spray the chlorine with out every having to open the inspection window.

Regards,

Szybowski



 

From: glenbrown@vodamail.co.za
To: personal_submersibles@psubs.org
Subject: Re: [PSUBS-MAILIST] GOTTA SEE VIDEO
Date: Sun, 23 Aug 2009 21:31:05 +0300

Hi Frank D
Maybe you should make a spraying wand that you can spray anti fouling into all the cavities.And like you say have some kind of inspection cover that the authorities could use to inspect your mbt's anti fouling comes in a different colors.I would love to see your MBT's design.
GlenSA
 
 


 



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.392 / Virus Database: 270.13.64/2320 - Release Date: 08/22/09 18:04:00