Hugh, This sounds great and thank you for extending the special to the PSUB community. R/Jay Resepectfully, Jay K. Jeffries Andros Is., Bahamas Save the whales, collect the whole set. -----Original Message----- Hi All, Guess this is our specialty. Excuse the plug here as we are commercial. We have 1/4" through 6" valves. Stainless Steel or a combination of Stainless and Aluminium in the 1" series and larger. If you are wanting panel valves then that is a bit different. Ours are not instrument valves like Swagelok and Parker but can be mounted to a panel with our brackets. These are designed for high pressure gas, so for air or water it is a breeze. We also import some cheaper valves from other places. Take a look at the web site www.eclipsevalves.com We will do a special deal for p-subbers but freight may be a problem. I will get our people to put up a price list. We sell against Italian valves. However there are low pressure valves on the market that are cheaper. Most of our valves exceed 30,000 psi burst pressure with MAWP of 5000 psi plus. We are also making some valves for subs such as Vent valves, Combination valves 2" with pneumatic and Manual shutoff in the same valve body. Typically we can do a 5000 psi 1/2" valve for around the 80 dollar price and a 2 inch #300 for US $250. Chs Hugh |