[
Date Prev
][
Date Next
][
Thread Prev
][
Thread Next
][
Date Index
][
Thread Index
]
Re: [PSUBS-MAILIST] Double Seal Requirements of PVHO Certified Viewports
To
:
personal_submersibles@psubs.org
Subject
: Re: [PSUBS-MAILIST] Double Seal Requirements of PVHO Certified Viewports
From
:
ShellyDalg@aol.com
Date
: Fri, 24 Jul 2009 10:23:54 EDT
Reply-to
:
personal_submersibles@psubs.org
Sender
:
owner-personal_submersibles@psubs.org
Section 3 says the "gasket under the retaining ring" is one of the seals. The sikaflex or O ring or flange gasket is the other.
It says no O ring groove in the window or seat, so where would you put it? In the side of the mounting ring?
Frank D.
Follow-Ups
:
RE: [PSUBS-MAILIST] Double Seal Requirements of PVHO Certified Viewports
From:
"Brian Cox" <ojaivalleybeefarm@dslextreme.com>
Re: [PSUBS-MAILIST] Double Seal Requirements of PVHO Certified Viewports
From:
vbra676539@aol.com
Prev by Date:
Re: [PSUBS-MAILIST] water level
Next by Date:
RE: [PSUBS-MAILIST] Double Seal Requirements of PVHO Certified Viewports
Previous by thread:
[PSUBS-MAILIST] Double Seal Requirements of PVHO Certified Viewports
Next by thread:
RE: [PSUBS-MAILIST] Double Seal Requirements of PVHO Certified Viewports
Index(es):
Date
Thread