Vance,
We have a supplier in NZ that makes a nice small 2 speed aluminium hand pump with SS internals. Would go for about $750 USD. If interested I could chase down. Chs Hugh
Hugh Fulton.
Managing Director
Tel : +64 9 5276055
Mobile: 021 680 174
hfulton@eclipsevalves.com
............................................................................
Eclipse Valves Ltd. www.eclipsevalves.com
PO Box 18367, Glen Innes, Auckland 1743, NZ.
Tel: +64 9 527 6135. Fax: +64 9 527 4532.
............................................................................
The information contained in this email is privileged and confidential and is intended for the addressee only.
If you are not the intended receipt you are asked to respect the confidentiality and to not disclose or make use
of its contents. If you have received in error please destroy or contact the sender immediately.
From: owner-personal_submersibles@psubs.org [mailto:owner-personal_submersibles@psubs.org] On Behalf Of vbra676539@aol.com
Sent: 24 July 2009 04:13
To: personal_submersibles@psubs.org
Subject: Re: [PSUBS-MAILIST] water level
Sent: 24 July 2009 04:13
To: personal_submersibles@psubs.org
Subject: Re: [PSUBS-MAILIST] water level
Maybe.
Vance
-----Original Message-----
From: Brent Hartwig <brenthartwig@hotmail.com>
To: PSUBSorg <personal_submersibles@psubs.org>
Sent: Thu, Jul 23, 2009 12:08 pm
Subject: RE: [PSUBS-MAILIST] water level
Vance
-----Original Message-----
From: Brent Hartwig <brenthartwig@hotmail.com>
To: PSUBSorg <personal_submersibles@psubs.org>
Sent: Thu, Jul 23, 2009 12:08 pm
Subject: RE: [PSUBS-MAILIST] water level
Don't you know a guy that could hook you up with one of those, Vance. ;}
BDH
To: personal_submersibles@psubs.org
Subject: Re: [PSUBS-MAILIST] water level
Date: Wed, 22 Jul 2009 08:30:01 -0400
From: vbra676539@aol.com
You have just described the VBT system in a DW 2000. I'd do that myself if I could find the right hand pump.
Vance
-----Original Message-----
From: David Bartsch <dbartsch2236@hotmail.com>
To: personal_submersibles@psubs.org
Sent: Wed, Jul 22, 2009 3:52 am
Subject: RE: [PSUBS-MAILIST] water level
Subject: Re: [PSUBS-MAILIST] water level
Date: Wed, 22 Jul 2009 08:30:01 -0400
From: vbra676539@aol.com
You have just described the VBT system in a DW 2000. I'd do that myself if I could find the right hand pump.
Vance
-----Original Message-----
From: David Bartsch <dbartsch2236@hotmail.com>
To: personal_submersibles@psubs.org
Sent: Wed, Jul 22, 2009 3:52 am
Subject: RE: [PSUBS-MAILIST] water level
What if one connected a check valve in a pipe near the boats hull (with the flow aimed outward) and used a hand operated piston pump with long enough handle to apply enough force on a short stroke thin diameter piston to expell water against outside sea pressure while at depth to reduce the amount of water contained in this tank? When the handle is again drawn back, additional water from this tank could enter this piston. Once finished, isolation valves could be closed to prevent additional water from transfering.
&nb sp; David Bartsch
> Date: Tue, 21 Jul 2009 23:09:0 4 -0700
> From: cast55@telus.net
> To: personal_submersibles@psubs.org
> Subject: Re: [PSUBS-MAILIST] water level
>
> Don't forget to account for the possibility of having to adjust in the
> other direction - i.e. adding buoyancy to compensate for reduction in
> volume as the hull deflects at depth. For a small, shallow sub, this
> won't be significant, but as depth and the size of vehicle increase, the
> change in volume may become significant.
>
> -Sean
>
>
> ShellyDalg@aol.com wrote:
> > Hi David. A sight glass is the easiest to read on a tank, but it's not
> > much use to us for variable ballast tanks. The reason being, it would
> > need to be able to withstand a lot of pressure and they are hard to
> > keep clean.
> > The variable ballast tank, often called "hard ballast tanks" are
> > pressure vessels that will withstand being opened at depth to adjust
> > buoyancy when you're at your deepest operating depth, plus what ever
> > safety factor you wanted.
> > Although a simple "trim tank" can be used to adjust buoyancy at
> > or near the surface, and then valved off with a set amount of water
0A> > ballast in it, no adjustment can be made when you're deep unless the
0A> > tank is able to withstand the pressure at your deepest dive.
> > Once you open a hard ballast tank at depth, and close the valves
> > to maintain that level of water, the pressure is "locked" into that
> > tank. Then, when you get back to the surface, you release that
> > pressure by opening the valve and letting the pressurized bubble blow
> > out the tank.
> > If you want to adjust for more buoyancy at depth, due to changes
> > in salinity or maybe you picked up something from the bottom, you must
> > blow high pressure air into the tank until the correct water volume is
> > achieved, then close the tank off to maintain that level of water.
> > Knowing just how much water is in your hard ballast tank is a
> > problem.and one that I considered a while back. The "sight glass"
> > method would require a very heavy walled clear tube with valves in
> > case it developed a leak. I'm not sure how risky that would be if it
> > blew out but it should be fairly easy to build.
> > Another method would be to use a "see through"tank. There's a
> > filament wound fiberglass/composite tank available called "Lite"
> > propane tanks and they come in a few sizes, the largest being about 8
> > gallons for use on warehouse type propane fork lifts. These will
> > withstand 250 psi ( with a safety factor) and you can tell at a glance
> > how much liquid is in it. They come with threaded fittings molded in,
> > and a metal "basket" that protects it from bumps. They run about $300
> > each I think.
> > I'm leaning toward the see through tank right now, and have a
> > place inside designed for it. That only gives me 64 pounds of variable
> > ballast though. ( 8 gallons at 8 pounds per). It would be nice to
> > have more adjustment, like if you found something and wanted to pick
> > it up and bring it back to the surface. It's possible to blow a little
> > air into the "soft" ballast tank for lifting purposes, but that bubble
> > will become much larger as you near the surface, making it difficult
> > to control buoyancy as your depth changes.
> > Most psubs have a few lead bricks that get adjusted at the
> > surface for how much payload you're carrying on any given dive, like
> > an additional passenger, some added machinery or cargo, or what ever
> > will change the total weight of the sub.
> > Buoyancy is based on water displacement and total weight in water,
> > so when you add a passenger, you must ask them how much they weigh and
> > adjust the lead bricks according ly to achieve "neutral" buoyancy. A
> > hard ballast tank is required for20small changes in buoyancy like
> > salinity and temperature changes. For instance, if I launch my boat in
> > the harbor, which is a river mouth with a small amount of dissolved
> > salts, and then motor out into the ocean where the salinity level is
> > higher, the sub is displacing more weight ( the water is saltier so is
> > heavier ) so additional ballast must be added to maintain "neutral. It
> > runs about 4% from fresh to salt water while temperature can add about 1%.
> > These are percentages of "displacement" or the total volume of water
> > displaced by the submarine. Several "high dollar" subs I've read about
> > have as much as 240 pounds of "variable" ballast. Not sure how they
> > achieve that, but it's useful if you plan on bringing back samples or
> > stuff from down deep.
> > Frank D.
> >
> > ------------------------------------------------------------------------
> > What's for dinner tonight? Find quick and easy dinner ideas
> > <"http://food.aol.com/dinner-tonight?ncid=emlcntusfood00000009>; for any
> > occasion.
>
>
>
>
> ************************************************************************
> ****************************************** ******************************
> ****************************************************************** ******
> The personal submersibles mailing list complies with the US Federal
> CAN-SPAM Act of 2003. Your email address appears in our database
> because either you, or someone you know, requested you receive messages
> from our organization.
>
> If you want to be removed from this mailing list simply click on the
> link below or send a blank email message to:
> removeme-personal_submersibles@psubs.org
>
> Removal of your email address from this mailing list occurs by an
> automated process and should be complete within five minutes of
> our server receiving your request.
>
> PSUBS.ORG
> PO Box 53
> Weare, NH 03281
> 603-529-1100
> ************************************************************************
> ************************************************************************
> ************************************************************************
>
&nb sp; David Bartsch
> Date: Tue, 21 Jul 2009 23:09:0 4 -0700
> From: cast55@telus.net
> To: personal_submersibles@psubs.org
> Subject: Re: [PSUBS-MAILIST] water level
>
> Don't forget to account for the possibility of having to adjust in the
> other direction - i.e. adding buoyancy to compensate for reduction in
> volume as the hull deflects at depth. For a small, shallow sub, this
> won't be significant, but as depth and the size of vehicle increase, the
> change in volume may become significant.
>
> -Sean
>
>
> ShellyDalg@aol.com wrote:
> > Hi David. A sight glass is the easiest to read on a tank, but it's not
> > much use to us for variable ballast tanks. The reason being, it would
> > need to be able to withstand a lot of pressure and they are hard to
> > keep clean.
> > The variable ballast tank, often called "hard ballast tanks" are
> > pressure vessels that will withstand being opened at depth to adjust
> > buoyancy when you're at your deepest operating depth, plus what ever
> > safety factor you wanted.
> > Although a simple "trim tank" can be used to adjust buoyancy at
> > or near the surface, and then valved off with a set amount of water
0A> > ballast in it, no adjustment can be made when you're deep unless the
0A> > tank is able to withstand the pressure at your deepest dive.
> > Once you open a hard ballast tank at depth, and close the valves
> > to maintain that level of water, the pressure is "locked" into that
> > tank. Then, when you get back to the surface, you release that
> > pressure by opening the valve and letting the pressurized bubble blow
> > out the tank.
> > If you want to adjust for more buoyancy at depth, due to changes
> > in salinity or maybe you picked up something from the bottom, you must
> > blow high pressure air into the tank until the correct water volume is
> > achieved, then close the tank off to maintain that level of water.
> > Knowing just how much water is in your hard ballast tank is a
> > problem.and one that I considered a while back. The "sight glass"
> > method would require a very heavy walled clear tube with valves in
> > case it developed a leak. I'm not sure how risky that would be if it
> > blew out but it should be fairly easy to build.
> > Another method would be to use a "see through"tank. There's a
> > filament wound fiberglass/composite tank available called "Lite"
> > propane tanks and they come in a few sizes, the largest being about 8
> > gallons for use on warehouse type propane fork lifts. These will
> > withstand 250 psi ( with a safety factor) and you can tell at a glance
> > how much liquid is in it. They come with threaded fittings molded in,
> > and a metal "basket" that protects it from bumps. They run about $300
> > each I think.
> > I'm leaning toward the see through tank right now, and have a
> > place inside designed for it. That only gives me 64 pounds of variable
> > ballast though. ( 8 gallons at 8 pounds per). It would be nice to
> > have more adjustment, like if you found something and wanted to pick
> > it up and bring it back to the surface. It's possible to blow a little
> > air into the "soft" ballast tank for lifting purposes, but that bubble
> > will become much larger as you near the surface, making it difficult
> > to control buoyancy as your depth changes.
> > Most psubs have a few lead bricks that get adjusted at the
> > surface for how much payload you're carrying on any given dive, like
> > an additional passenger, some added machinery or cargo, or what ever
> > will change the total weight of the sub.
> > Buoyancy is based on water displacement and total weight in water,
> > so when you add a passenger, you must ask them how much they weigh and
> > adjust the lead bricks according ly to achieve "neutral" buoyancy. A
> > hard ballast tank is required for20small changes in buoyancy like
> > salinity and temperature changes. For instance, if I launch my boat in
> > the harbor, which is a river mouth with a small amount of dissolved
> > salts, and then motor out into the ocean where the salinity level is
> > higher, the sub is displacing more weight ( the water is saltier so is
> > heavier ) so additional ballast must be added to maintain "neutral. It
> > runs about 4% from fresh to salt water while temperature can add about 1%.
> > These are percentages of "displacement" or the total volume of water
> > displaced by the submarine. Several "high dollar" subs I've read about
> > have as much as 240 pounds of "variable" ballast. Not sure how they
> > achieve that, but it's useful if you plan on bringing back samples or
> > stuff from down deep.
> > Frank D.
> >
> > ------------------------------------------------------------------------
> > What's for dinner tonight? Find quick and easy dinner ideas
> > <"http://food.aol.com/dinner-tonight?ncid=emlcntusfood00000009>; for any
> > occasion.
>
>
>
>
> ************************************************************************
> ****************************************** ******************************
> ****************************************************************** ******
> The personal submersibles mailing list complies with the US Federal
> CAN-SPAM Act of 2003. Your email address appears in our database
> because either you, or someone you know, requested you receive messages
> from our organization.
>
> If you want to be removed from this mailing list simply click on the
> link below or send a blank email message to:
> removeme-personal_submersibles@psubs.org
>
> Removal of your email address from this mailing list occurs by an
> automated process and should be complete within five minutes of
> our server receiving your request.
>
> PSUBS.ORG
> PO Box 53
> Weare, NH 03281
> 603-529-1100
> ************************************************************************
> ************************************************************************
> ************************************************************************
>
Windows Live™ Hotmail®: Celebrate the moment with your favorite sports pics. Check it out. =
=
__________ Information from ESET NOD32 Antivirus, version of virus signature database 4265 (20090721) __________
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com