[
Date Prev
][
Date Next
][
Thread Prev
][
Thread Next
][
Date Index
][
Thread Index
]
Re: [PSUBS-MAILIST] mounting acrylic dome in fibreglass
To
:
personal_submersibles@psubs.org
Subject
: Re: [PSUBS-MAILIST] mounting acrylic dome in fibreglass
From
:
ShellyDalg@aol.com
Date
: Fri, 15 May 2009 12:16:11 EDT
Reply-to
:
personal_submersibles@psubs.org
Sender
:
owner-personal_submersibles@psubs.org
I think the strapping on the domes was primarily for bump protection. The dome/hatch should seal at 10 feet or so, and the locking dogs hold it down in shallow water. Frank D.
Prev by Date:
Re: [PSUBS-MAILIST] mounting acrylic dome in fibreglass
Next by Date:
[PSUBS-MAILIST] Thank you
Previous by thread:
Re: [PSUBS-MAILIST] mounting acrylic dome in fibreglass
Next by thread:
Re: [PSUBS-MAILIST] Re: Pressure vessel welding
Index(es):
Date
Thread