[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PSUBS-MAILIST] STANAG NATO standard flange

It would be nice to capture all that. Thanks Steve, I'll look forward to what you guys come up with.
Vance


-----Original Message-----
From: Steve McQueen <psub101@iquest.net>
To: personal_submersibles@psubs.org
Sent: Sun, 29 Mar 2009 6:40 pm
Subject: RE: [PSUBS-MAILIST] STANAG NATO standard flange

Brent,
Give me a day or so to take some better photos and get dimensions.  Yes, the bands are with the end caps.  I will send photos as well.  Thanks for volunteering to do drawings as I lack your skill set at the moment.  
 
Steve
 
From: owner-personal_submersibles@psubs.org [mailto:owner-personal_submersibles@psubs.org] On Behalf Of Brent Hartwig
Sent: Sunday, March 01, 2009 6:26 PM
To: PSUBSorg
Subject: RE: [PSUBS-MAILIST] STANAG NATO standard flange
 


Greetings Steve,   
 
I see is pays for me to have friends in high places. :}   I totally forgot you had those pods.  I would be very interested in those pictures.  Also if your willing and able to take some measurements I'll make 3D assembly models of them and share them with the group.  Are the SS attachment rings still with your pods?

Regards,
Szybowski



From: psub101@iquest.net
To: personal_submersibles@psubs.org
Subject: RE: [PSUBS-MAILIST] STANAG NATO standard flange
Date: Sun, 29 Mar 2009 17:51:05 -0400
Brent,
I have a battery pod with end caps from the PC14 series boat. I can send some photos if it helps.
Steve McQueen
 
From: owner-personal_submersibles@psubs.org [mailto:owner-personal_submersibles@psubs.org] On Behalf Of vbra676539@aol.com
Sent: Sunday, March 01, 2009 8:27 AM
To: personal_submersibles@psubs.org
Subject: Re: [PSUBS-MAILIST] STANAG NATO standard flange
 
Yep, 16' long, one piece on the PC1202 and PC16 boats.
Vance


-----Original Message-----
From: Brent Hartwig <brenthartwig@hotmail.com>
To: PSUBSorg <personal_submersibles@psubs.org>
Sent: Sun, 1 Mar 2009 12:38 am
Subject: RE: [PSUBS-MAILIST] STANAG NATO standard flange


Vance, I looked at the pictures I have of the Perry subs, and I see what you mean. It would be interesting to see some close-up pictures of the pod caps removed.
 
Are those teak skids in this picture?
 
 
 
 
 
 

Regards,
Szybowski


To: personal_submersibles@psubs.org
Subject: Re: [PSUBS-MAILIST] STANAG NATO standard flange
Date: Sat, 28 Feb 2009 19:40:35 -0500
From: vbra676539@aol.com

Those are V-clamps, like the ones Sta-Rite and other pool pump manufacturers use for casing clamps on their pump bodies. That was a standard deal on Perry subs. Phil doesn't use them, by the way. Even in the old days, Hyco bolted the pod ends on Aquarius (lots of BIG bolts). The clamps are quick and easy, but I've seen more than one of them knocked off or damaged. It's really unhandy when you lift your million dollar Perry out of the water and watch one of the pod covers go bloop, right into the drink. Let's see. Spares? No, we don't have another one. Damn. What now? Hmm. Somebody get the Scotch. I need a drink.
Vance


-----Original Message-----
From: Brent Hartwig <brenthartwig@hotmail.com>
To: PSUBSorg <personal_submersibles@psubs.org>
Sent: Sat, 28 Feb 2009 6:06 pm
Subject: RE: [PSUBS-MAILIST] STANAG NATO standard flange


Jay,   I had been thinking about how the battery pod caps on the Triton 1000 were being attached, and figured it would be a lot like the beveled clamping means your talking about.  But using a small hinge like is used on these tri clover clamps we use at the winery to attach and seal hoses to tanks and what not.
 
 
It's hard to make out the hinge on the Triton pods, but you can see one on the top of the starboard pod in this rendering of the sub if you look closely and the tightening bolt on the bottom.
 
 
 
 
 
 
High pressure tri clover clamps.
 
 
 

Regards,
Szybowski


From: bottomgun@mindspring.com
To: personal_submersibles@psubs.org
Subject: RE: [PSUBS-MAILIST] STANAG NATO standard flange
Date: Sat, 28 Feb 2009 16:58:20 -0500
Brent,
Did not look closely at the unit that was on our pier a short time ago but from inspection of the images, it looks like the mating unit is one or the other but not both.  The two-part clamping ring interfaces with beveled surfaces so that when the tighter it is drawn together, the more pressure is put on the flat mating surfaces.
R/Jay
 
Respectfully,
Jay K. Jeffries
Andros Is., Bahamas
 
As scarce as the truth is, the supply has always been in excess of the demand.
    -Josh Billings
 
 
 
From: owner-personal_submersibles@psubs.org [mailto:owner-personal_submersibles@psubs.org] On Behalf Of Brent Hartwig
Sent: Saturday, February 28, 2009 4:51 PM
To: PSUBSorg
Subject: RE: [PSUBS-MAILIST] STANAG NATO standard flange
 


Jay,
 
So does that mean they can be locked by both a rotating ring type, as well as a two-part coupling flange, as it appears this DART unit can?     Are all the outer mating parts of the two-part coupling flange beveled so they increase the pressure on the seal further as the two clam shells are brought closer together?

Regards,
Szybowski

=
 
Access 350+ FREE radio stations anytime from anywhere on the web. Get the Radio Toolbar!
=
 
Access 350+ FREE radio stations anytime from anywhere on the web. Get the Radio Toolbar!