[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PSUBS-MAILIST] STANAG NATO standard flange

The photo of Nadir and Sea Diver was taken in Aberdeen, our first stop out of Germany prior to making the first op in the oil patch. You can tell it's summer. No rain. In the North Sea, we gauged seasons by the rain. In the winter, it was colder. In the summer, you got the occasional break. My cabin was on the starboard side, just forward of the engine room air intakes (the mushrooms).
Vance


-----Original Message-----
From: Brent Hartwig <brenthartwig@hotmail.com>
To: PSUBSorg <personal_submersibles@psubs.org>
Sent: Sun, 1 Mar 2009 3:00 pm
Subject: RE: [PSUBS-MAILIST] STANAG NATO standard flange



I thought it might.  Here is some more I found interesting.

http://www.nickmessinger.co.uk/ships.html



"The murals in restaurants are on par with the food in museums." -- Peter De Vries



Cheers,
Szybowski




To: personal_submersibles@psubs.org
Subject: Re: [PSUBS-MAILIST] STANAG NATO standard flange
Date: Sun, 1 Mar 2009 08:33:22 -0500
From: vbra676539@aol.com

Man, it sure does bring back memories!
Vance


-----Original Message-----
From: Brent Hartwig <brenthartwig@hotmail.com>
To: PSUBSorg <personal_submersibles@psubs.org>
Sent: Sun, 1 Mar 2009 12:31 am
Subject: RE: [PSUBS-MAILIST] STANAG NATO standard flange



Jay,

The clamping device in the picture linked below on a Intersub support ship looks like it might be the type your talking about.  I suspect Vance has used that one.







Regards,
Szybowski




From: bottomgun@mindspring.com
To: personal_submersibles@psubs.org
Subject: RE: [PSUBS-MAILIST] STANAG NATO standard flange
Date: Sat, 28 Feb 2009 16:24:36 -0500

Brent,
The two-part coupling flange is common in the oil patch for mating diving bells with decompression facilities for crew transfer.  The small portable chambers depicted in the DART brochure are used by US Navy diving detachments during remote ops.
R/Jay
 
Respectfully,
Jay K. Jeffries
Andros Is., Bahamas
 
As scarce as the truth is, the supply has always been in excess of the demand.
    -Josh Billings
 
 
 
From: owner-personal_submersibles@psubs.org [mailto:owner-personal_submersibles@psubs.org] On Behalf Of Brent Hartwig
Sent: Saturday, February 28, 2009 4:13 PM
To: PSUBSorg
Subject: [PSUBS-MAILIST] STANAG NATO standard flange
 


I found this set of decompression units from a manufacturer in the Netherlands, that are using the STANAG NATO standard flange.  The main unit has a interesting pressure hull design.  It looks like they are using a different locking means for there add on unit, in a clam shell arrangement. I'll need a at least two STANAG flanges on my live aboard sub.
 
 
 
 
 
 
  "Success didn't spoil me, I've always been insufferable." ~ Fran Lebowitz
 
 
 
Regards,
Szybowski




> Subject: Re: [PSUBS-MAILIST] NATO standard flange
> From: MerlinSub@t-online.de
> To: personal_submersibles@psubs.org
> Date: Wed, 25 Feb 2009 20:53:00 +0000
>
>
> http://www.simsi.org/Soci/Documenti/AQA00311.pdf
>
> Page 25ff. vbr Carsten
>
>
> "Sean T. Stevenson" <cast55@telus.net> schrieb:
>> Based on a brief internet search, I understand that there is a NATO
>> standard arrangement for the interconnection of hyperbaric transport
>> chambers, personnel transfer capsules and similar arrangements designed
>> for transfer under pressure. A number of hyperbaric system
>> manufacturers quote inclusion of this flange in their literature, but I
>> am having difficulty sourcing the actual description. Does anyone know
>> where details about this NATO standard bayonet flange can be found?
>>
>>
>> -Sean
>>
>>
>>
>>
>> ************************************************************************
>> ************************************************************************
>> ************************************************************************
>> The personal submersibles mailing list complies with the US Federal
>> CAN-SPAM Act of 2003. Your email address appears in our database
>> because either you, or someone you know, requested you receive messages
>> from our organization.
>>
>> If you want to be removed from this mailing list simply click on the
>> link below or send a blank email message to:
>> removeme-personal_submersibles@psubs.org
>>
>> Removal of your email address from this mailing list occurs by an
>> automated process and should be complete within five minutes of
>> our server receiving your request.
>>
>> PSUBS.ORG
>> PO Box 53
>> Weare, NH 03281
>> 603-529-1100
>> ************************************************************************
>> ************************************************************************
>> ************************************************************************
>>
>>
>
>
>
>
> ************************************************************************
> ************************************************************************
> ************************************************************************
> The personal submersibles mailing list complies with the US Federal
> CAN-SPAM Act of 2003. Your email address appears in our database
> because either you, or someone you know, requested you receive messages
> from our organization.
>
> If you want to be removed from this mailing list simply click on the
> link below or send a blank email message to:
> removeme-personal_submersibles@psubs.org
>
> Removal of your email address from this mailing list occurs by an
> automated process and should be complete within five minutes of
> our server receiving your request.
>
> PSUBS.ORG
> PO Box 53
> Weare, NH 03281
> 603-529-1100
> ************************************************************************
> ************************************************************************
> ************************************************************************
>
=
=