|
I am looking at building some tear drop shape tanks. I have som 18
gauge being bent.
I am going to add some flat stock to beef em up a tad, trying to
keep the overall diameter
at 4'. For me the welding will be a challenge. I don't think
ya can have leaks heheh
Will post some pics when I get there.
Dean
In a message dated 2/11/2009 11:54:00 A.M. Central Standard Time,
kocpnt@tds.net writes:
Hi Dean,
The tanks are made from 12 gauge steel sheet which I think is .109 thick
if I remember right.
Thanks for the good words.
Best Regards,
Jim K
----- Original Message -----
Sent: Wednesday, February 11, 2009
11:00 AM
Subject: Re: [PSUBS-MAILIST] soft
ballast
looks great Jim.
I am guessing the tanks are made of tin. What thickness did you
use?
I am in the process of making mine.
Dean
In a message dated 2/11/2009 7:07:28 A.M. Central Standard Time, kocpnt@tds.net
writes:
Hi All,
Finally making a bit of progress again! I've
posted a picture in the projects section of my first section of soft
ballast tank tacked into place.
I'm hoping to finish all welding on the
pressure hull proper before the end of February.It depends on work
schedule, but I think it's doable.
There will still be much more to do, but I'm
gaining on it!!!!
Best Regards,
Jim
K
The year's hottest artists on the red carpet at the Grammy Awards. AOL Music
takes you there.
The year's hottest artists on the red carpet at the Grammy Awards. AOL Music takes you there.
|