|
That would be easier if the heads are already attached. I might weld them in with the heads off. I was copying what I had seen on the S201. There heads have bolt on flanges on them, so they could just set them in such a way that your not welding over head. Do I need two root TIG welds, or just one? Szybowski From: ShellyDalg@aol.com Date: Wed, 4 Feb 2009 18:47:47 -0500 Subject: Re: [PSUBS-MAILIST] S201 Plate Type Thru Hull Assembly To: personal_submersibles@psubs.org Are you showing the main weld beads done overhead from the inside ? Better
to put the main welding operation where it's easier to get to, using gravity as
your friend, on the top. Frank D. Great Deals on Dell Laptops. Starting at $499. |