Jim, Go to www.usabluebook.com
for gages incremented in feet of water. If you will be diving in mainly
salt water the faces need to be changed. Two inch gages don’t give
you much for resolution. As an aside, an accurate depth gage can be used
for navigation when you on near bottom with some contour. It is common
practice to run down an isoclines (I.e. follow a depth curve) when trying to
navigate to something. Www.mar-vel.com
should have gages that will measure feet of seawater. R/Jay Respectfully, Jay K. Jeffries Andros Is., Bahamas As scarce as the truth is, the supply has always been in excess of
the demand. -Josh Billings From:
owner-personal_submersibles@psubs.org
[mailto:owner-personal_submersibles@psubs.org] On Behalf Of Jim Kocourek Hi
All, I
am looking for depth gauges for my sub and ballast tanks. I wish to
use mechanical gauges with 2 inch face. I do not wish to use any
electronics at this time. Does anyone have a source for these. They will need
to go from 0 - 1000 feet. I
realize that I can re-lable standard pressure gauges but would like to buy the
correct ones if possible. Best
Regards, Jim
K |