RE: [PSUBS-MAILIST] Wet Exit Front Dome Position

["James Frankland" <james@guernseysubmarine.com>]

Hi Brent.

Its going to be centred, definitly.  Thats the only thing that is certain at the moment!

James




James,Have you decided if your going to center your front dome on the head, like one the Nemo sub, or are your going to move it down and position it at an set angle like the S101?  Keeping it centered would make it easier to open in a K-250 hatch configuration with the hinge on the bottom.  But on the other side of the coin, viewing would be better if it's lower and at an angle.

Each position wound remove a little bit different amount of head material, and would change the FEA results as well.

Regards,

Brent Hartwig