[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PSUBS-MAILIST] Stainless Welding.

To: <personal_submersibles@psubs.org>
Subject: [PSUBS-MAILIST] Stainless Welding.
From: <james@guernseysubmarine.com>
Date: Tue, 17 Jun 2008 09:03:52 +0100
Reply-to: personal_submersibles@psubs.org
Sender: owner-personal_submersibles@psubs.org

Hi All.

As my sub will be used in the sea, ive decided to make some parts out of stainless rather than mild steel.  In particular, i have made the hatch hinge arrangement all again.  (I made it from mild steel to start with).   Here is a picture of the original brackets i made.  http://www.guernseysubmarine.com/index_files/Page10471.htm

Ive made the whole thing now again from 316L (no picture yet) and its all assembled ready to weld to the conning tower.  Then i just thought of one thing...

I will be welding 316L on the brackets straight onto A516 on the tower.  Can anyone see any problems with that?  The welding of dissimilar metals straight onto the hull?

I think it should be no problems as the throughhulls are the same principle, but what do you all think?  Any problems that i havent thought about?

Thanks
James

Follow-Ups:
- Re: [PSUBS-MAILIST] Stainless Welding.
  - From: " Dan. H." <jumachine@comcast.net>

Prev by Date: Re: [PSUBS-MAILIST] Penetrators/corrosion.
Next by Date: Re: [PSUBS-MAILIST] Stainless Welding.
Previous by thread: RE: [PSUBS-MAILIST] Archives search
Next by thread: Re: [PSUBS-MAILIST] Stainless Welding.
Index(es):
- Date
- Thread