[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PSUBS-MAILIST] Shaft sealing

To: personal_submersibles@psubs.org
Subject: [PSUBS-MAILIST] Shaft sealing
From: "Øystein Skarholm" <skarholm@gmail.com>
Date: Tue, 9 Jan 2007 23:38:56 +0100
Domainkey-signature: a=rsa-sha1; q=dns; c=nofws; s=beta; d=gmail.com; h=received:message-id:date:from:to:subject:mime-version:content-type; b=L0Uf00jZUJoMr0ktpkbZFPm981FdCf2hT9P8oJbU/Cmb0VrxZIWg/fniL6hppbUaOg/hjbMmMXb4CbsfBQYMLglXGzE9I4//O20oY2VDeN2h6rs6qRZA+aqw7vpPTNDJlU/RGbiePi+MU53FkxSFAZzAenGzw8j0SviK+qVMPVA=
Reply-to: personal_submersibles@psubs.org
Sender: owner-personal_submersibles@psubs.org

What kind of shaft sealing would be best to use on a propeller shaft for the main propeller. Depth rate about 200m. Would it be necessary to pressure compensate, say between two set of seals?

--
Vennlig hilsen
Øystein Skarholm

Prev by Date: Re: [PSUBS-MAILIST] Horizontal Pressure Hull Weldment Supports?
Next by Date: Re: [PSUBS-MAILIST] Horizontal Pressure Hull Weldment Supports?
Previous by thread: Re: [PSUBS-MAILIST] Horizontal Pressure Hull Weldment Supports?
Next by thread: [PSUBS-MAILIST] Elliptical Heads
Index(es):
- Date
- Thread