[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PSUBS-MAILIST] Ring Thruster Data



Hello Recon1st        To start a new thread just change your subject line.  As for your sketches save them as jpeg pic file or the like then upload them to a image hosting site such as  

http://imageshack.us/

The highlight and copy the direct link and paste it on your email.


From: Recon1st@aol.com
Reply-To: personal_submersibles@psubs.org
To: personal_submersibles@psubs.org
Subject: Re: [PSUBS-MAILIST] Ring Thruster Data
Date: Sun, 7 Jan 2007 12:40:55 EST

once again my ignorance to this media and not
using the correct subject matter. following
is an idea i have been thinking on a rescue device
used from surface craft for a poor diabled psub
 
 
What ya all think? still just basic planning
but I havnt' seen anything on this in the
archives. Are their any existing methods
been done already?
 
 
following is my idea of an emergency retrieval device to pull
disabled psub up.
 
Basically it consist of a float attached to a spool of small
diameter strong line (such as SPECTRA).
 
The float is released in an emergency and surfaces.
Top side on the tender is a cone shaped heavy lifting
device with a hole thru it to run the line from float.
The cone device is equiped with an appropriate
device to attach a wench and cable..
 
Then the cone is overboard and allowed to follow the
line down to and into  the receptacle on sub.
 
the cone will penitrate thru hole and locked in when locking
fingers spring back above it. This will lock it in place and
the wench can than be used to bring the sub to surface.
 
The full details strengths and location etc have not been
worked out but I think it would work even if sub is at a fairly
steep anglel from vertical, the ring diameter would determine
what angles could be achieved, and naturally the superstructure
would have to be built to handle the load.
 
attached is simple sketch
 
once again I have not been able to attach the sketch
 
Appreciate any assistance on what I might not be doing right.\
to send attach or sketchs on note
 
Dean Ackman
 
 
 
             _____
            }        }                   |
            }        }    float           |
            ______                      |  cable to wench and attached to cone
                 |                           |
                 |         line             |
              __{_0----------------------|_
             \    |   /
              \   }  /  cone
                \ | /
                  |
          --------|-----------
          |  \    |        / |
          |    \   |      / <----------------spring loaded locking fingers cone falls thru
          |      \ |   /     |                 will not come back out
          |        |         |   cone receiver
          |        |         |
          _____|______ 
                   | 
 

************************************************************************ ************************************************************************ ************************************************************************ The personal submersibles mailing list complies with the US Federal CAN-SPAM Act of 2003. Your email address appears in our database because either you, or someone you know, requested you receive messages from our organization. If you want to be removed from this mailing list simply click on the link below or send a blank email message to: removeme-personal_submersibles@psubs.org Removal of your email address from this mailing list occurs by an automated process and should be complete within five minutes of our server receiving your request. PSUBS.ORG PO Box 53 Weare, NH 03281 603-529-1100 ************************************************************************ ************************************************************************ ************************************************************************