[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PSUBS-MAILIST] Quick Casting question

Title: Message
woops... here's the image.
 
George H. Slaterpryce III
www.captovis.com
----- Original Message -----
Sent: Tuesday, September 05, 2006 2:52 PM
Subject: RE: [PSUBS-MAILIST] Quick Casting question

George,
 
D'you have a drawing of what you're proposing? I don't follow...
 
thanks,

Alec
-----Original Message-----
From: owner-personal_submersibles@psubs.org [mailto:owner-personal_submersibles@psubs.org] On Behalf Of George Slaterpryce
Sent: Tuesday, September 05, 2006 2:31 PM
To: PSUBS Mailing List
Subject: [PSUBS-MAILIST] Quick Casting question

Does anyone know if I do a waffle pattern on my Preasure Can's inner hull if that can substitute for welded in place braces? (Aluminum casting, inner pattern is a wide waffle pattern)
 
Or should I just stick with a straight pipe and weld the braces/ribs in it like normal?
 
Fiigured I'd ask before I tried this, Considering the lack of space I have it's a production to do anything with casting. but if it'll work I'tll probably be worth it.
 
Thanks.
 
George H. Slaterpryce III
www.captovis.com
=00The contents of this e-mail are intended for the named addressee only. It contains information that may be confidential. Unless you are the named addressee or an authorized designee, you may not copy or use it, or disclose it to anyone else. If you received it in error please notify us immediately and then destroy it.

Attachment: waffle.bmp
Description: Windows bitmap