Re: [PSUBS-MAILIST] Ballast Questions

["Rick and Marcia" <empiricus@telus.net>]

Carsten - thanks for the link - thank goodness for the images; the rest is
greek to me  ;-)

Das ist unt Uber boot for sure.  A dream come true.

BTW, where is your hard ballast and how much are you using?

Rick L
Vancouver



----- Original Message -----
From: "Carsten Standfuss" <Merlinsub@t-online.de>
To: <personal_submersibles@psubs.org>
Sent: Sunday, December 18, 2005 4:19 AM
Subject: Re: [PSUBS-MAILIST] Ballast Questions


> Hi Brian thats simple, go to  :
>
> http://www.euronaut.org/index.php?page=tech
>
> The first drawing shows all tanks.
>
> green      : Soft- Ballasttanks
> red        : Hard- Trim- and Bouancytanks
> yellow     : Diesel- and Trimtanks
> light blue : Freshwater
> orange     : grey and blackwater tank
> grey at bow bottom : No tank, just the space for the divers moonpool
> light grey : Free flooding superstructure
> dark grey  : Pressure hull
>
> The green and red tanks have man access holes on the top.
> The Diesel tanks not. The fresh -and waste water tanks a made from
> stainless steel and not part of the ship structure - the are bolted to
> the frame structure.
>
> Not vissible in this drawing is the longitudinal fix ballast moving
> ballast. Aa steel plate of a halft ton driven by a chain and a electric
> motor below the floor plates under the table. This compensate by a
> electric angle indicator if a crew member walks forward and aft.
>
> Best regards Carsten
>
> > Brian Cox schrieb:
> >
> > Hi,
> >         I have a question on the ballast set up on the Kittridge
> > subs,  Is that over hang on either side of the sub a soft ballast
> > area?  and then is there a hard ballast (variable ballast) directly
> > underneath the sub?  Just from looking at the pictures that's what I'm
> > getting .
> >
> > Also, if anyone knows,  Looking at Carsten's  Euronaute I can't figure
> > out where his ballast tanks are?  The sub does not appear to have a
> > double hull so I'm starting to get confused !   Is the ballast inside
> > the pressure hull so that the sub is more streamlined?  And so with no
> > double hull the sub is not intended to have any real freeboard?
> > Please if anyone could straighten me out on this it would be greatly
> > appreciated.
> >
> > Thanks
> >
> > Brian
>
>
>
> ************************************************************************
> ************************************************************************
> ************************************************************************
> The personal submersibles mailing list complies with the US Federal
> CAN-SPAM Act of 2003.  Your email address appears in our database
> because either you, or someone you know, requested you receive messages
> from our organization.
>
> If you want to be removed from this mailing list simply click on the
> link below or send a blank email message to:
> removeme-personal_submersibles@psubs.org
>
> Removal of your email address from this mailing list occurs by an
> automated process and should be complete within five minutes of
> our server receiving your request.
>
> PSUBS.ORG
> PO Box 311
> Weare, NH  03281
> 603-529-1100
> ************************************************************************
> ************************************************************************
> ************************************************************************
>




************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003.  Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.

If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
	removeme-personal_submersibles@psubs.org

Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of
our server receiving your request.

PSUBS.ORG
PO Box 311
Weare, NH  03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************