RE: [PSUBS-MAILIST] minn kota 2 hp

[daniel@tordaca.com]

Rick my english is like 70% so i don´t understand your question very
well, if you are asking about having space to use a mechanic seal, then
the answer is yes, there is plenty of room for it because the 1/2" ID
seal it´s 1 inch OD. and the motor housing nose hole is 1 1/4" that´s
for diameter and regarding to lenght i had to use a spacer behind the
prop to press the seal, it´s very easy to install and i´t works great
because i have presure tested it....please let me know is that was your
question, and if not, ask me again. Daniel 

> -------- Original Message --------
> Subject: Re: [PSUBS-MAILIST] minn kota 2 hp
> From: "rick miller" <rickm@pegasuscontrols.com>
> Date: Mon, October 31, 2005 6:26 pm
> To: <personal_submersibles@psubs.org>
> 
>              
> dan  
>     how much room in the nose for pressure comp bellows 
> rick m  
> ----- Original Message -----  
> From: Daniel Tortolani - Tordaca  
> To: personal_submersibles@psubs.org  
> Sent: Monday, October 31, 2005 1:30 PM 
> Subject: RE: [PSUBS-MAILIST] minn kota 2 hp 
> 
>  
>  Rick what 2 hp unit is that? The bigger Minn Kota motor I found was 101 lbs of thrust (about 1.75hp) and I used it?s original prop, but I had a problem they are way too big to fit the k-350 design, still thinking what to do?.I have broke it to one hundred pieces and reassembled it again lots of times, what do you want to know?    
>  
>    De: owner-personal_submersibles@psubs.org [mailto:owner-personal_submersibles@psubs.org] En nombre de rick miller
> Enviado el: lunes, 31 de octubre de 2005 16:04
> Para: personal_submersibles@psubs.org
> Asunto: [PSUBS-MAILIST] minn kota 2 hp   
>  hi 
>  has anyone played with the minn kota 2 hp unit yet. i was thinking about using it with the brigg and straton 3hp electric outboard's prop and kort nozzle. have to repitch the prop for the lower hp. it should add about 30% more power 
>  rick m 




************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003.  Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.

If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
	removeme-personal_submersibles@psubs.org

Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of
our server receiving your request.

PSUBS.ORG
PO Box 311
Weare, NH  03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************