[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PSUBS-MAILIST] breathing air regulator



I'm resending this mail... Sorry for those who had it already.

Pierre


----- Original Message ----- From: "Marie-Andrée et Pierre" <poulin.carrier@videotron.ca>
To: <personal_submersibles@psubs.org>
Sent: Thursday, June 02, 2005 8:33 AM
Subject: Re: [PSUBS-MAILIST] breathing air regulator


Hello (I'm not sure what is your name so I will call you silkyn)

My "pressure regulator" is in fact an idea Bill and Dan and I worked on.

I use 2 water sensors (basicaly 2 wires and when water touch the 2 wires, contact is made. Like a mercure switch but water instaid of mercure).

The 2 sensors are place inside a tube at 2 different heigh. The tube is under the sub. The top end of te tube is connected to the bottom of the sub.

When the sub goes down, water infiltrate the tube and goes up. Water touch the first sensor = nothing happen. Water touch the second sensors = the electronic circuit send a signal to open a electrical operated valves (a 2 way pneumatic cylinder valves. also known as a 5/2. 5 openings, 2 positions).

That valve let air inside the cabin. And push the water in the tube down. Water goes below second sensor = valve is still open. Water goes below the first sensor = circuit stop the valve from entering air inside the cabin.

So in theory, water level should always be between the 2 sensors. I have installed a small clear water reservoir inside the cabin. So if more water come in then air, i can stop descend and wait for air to catch up.

I hope this help... I also have a manual back-up air valve.

Later

Pierre "2 days before launch" Poulin





----- Original Message ----- From: "s ï l k y N?³" <silkyfx@hotmail.de>
To: <personal_submersibles@psubs.org>
Sent: Monday, May 30, 2005 12:33 AM
Subject: [PSUBS-MAILIST] breathing air regulator


Hey,
I recall a conversation about a digital air regulator (for ambient sub) approximately a week ago, the subject commented that it made more noise than he had expected and he wished to retain a proportion of his sanity.lol.

I am looking for a similar or the same devise.

Its purpose: to regulate the volume of breathing air going from the compressed air tanks into the sub.

My problem: I have no experience with choice of air regulator for a sub and I would greatly appreciate any advise and would enjoy reading about other regulator systems for ambient psubs.

A question: if I need 6L\m of breathing air at 1ATM then do I only require 3L\m at 2ATM

Dose anyone have any suggestions as to what I may have not considered or know where I can obtain this or similar product.

                                  sì&#322;&#311;ý T ©
--------------------------------------------------------------------------------------------------------
                      &#7901;          the 1horned devil           T ©

_________________________________________________________________
MSN Hotmail. Anmelden und gewinnen! http://www.msn.de/email/webbased/ Ihre Chance, eines von 10 T-Mobile MDA II zu gewinnen!




************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003.  Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.

If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
removeme-personal_submersibles@psubs.org

Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of
our server receiving your request.

PSUBS.ORG
PO Box 311
Weare, NH  03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************






************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003.  Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.

If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
	removeme-personal_submersibles@psubs.org

Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of
our server receiving your request.

PSUBS.ORG
PO Box 311
Weare, NH  03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************