Re: [PSUBS-MAILIST] Starting my sub

[MerlinSub@t-online.de (Carsten Standfuss)]

Ho Dj - sounds that you can manage this kind of projekts 
without any problems ;-) 

Ps.: I am looking for 6,5 ts of new accumulators, one 180 degree forward
looking sonar, one or two side scan sonar, a small ROV fit into my sail,
an aircraft intercom with four places, an oxygen pilots supply valve for
2-4, a 40-60 kw fuelcell from Ballard industries and a P51 Mustang with
drop tanks. 

No problem with the cut, for this thin steel I would maybe use a 1/25
grinder cutting plate. 

All what a submadman say makes sences.. and one box of german beer if
your boat is in the water on 23 July 2005. :-0

Best regards Carsten 


HI, Carsten  Dj here, Thanks for the info.
I have just completed the cradle for the tank, this will make it easy to
rotate and move around I can rotate the tank a complete 360 deg. I am
also
building a custom tandem wheel trailer.
I do have two fork lifts and two over head cranes. To answer your
question about the tank Shell is 1/4 in. SA 299 MOD
Steel grade ?
The end caps are 3/8 in. D&F and they are simi-hemispherical.
For installing the rings I was thinking about removing one end cap, this
also raises a question about using a cutting torch would this not stress
the area
being cut ? and then when I weld the end cap back on this would also
stress again ? or is this stress relieved at the final heating.
I plan on having this completed within a year if not sooner, and for the
cost that will be minimal, I have a machine shop I can do all of my own
machining. I have just about all the parts I need, I run a aircraft and
military surplus and I have about 10 acres of surplus items, gages,
pressure spheres,
actuators, accumulators, if you know of anyone that is looking for a
special part and they are having a hard time locating it shoot it to me 
most of the
time I can locate it. well I think thats all I have to say for now .  Dj
 
does any of this make sence?




************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003.  Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.

If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
	removeme-personal_submersibles@psubs.org

Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of receipt
of your request.

mailto:removeme-personal_submersibles@psubs.org

PSUBS.ORG
PO Box 311
Weare, NH  03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************