[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PSUBS-MAILIST] Starting my sub



4' x 12' equal to 1,22 x 3,658 m = displacement 4,275 m3. 
Ready Boat in the range of 5,2 - 6,5 ts. 

Projects starting with questions : 

- Do you have a carrier for that weight ?

- Do you have a strong forklift or hangar cranes and a hangar ? 

- Thickness of the shell ? 

- Shell steel grade ?

- Thickness of the endcaps - geometry of the endcaps ? 

- How get the frames in ? Cutting the tank in two parts ? 

- Can you spent 15000-25000 for this project in the next 2 years ?

regards Carsten.  

Daniel Lance schrieb:
> 
> DJ,
> I would have to second everything Alec Smyth said. If you really want
> a sub. Build a K350 from plans, using NEW steel from a reputable ASME
> certified Pressure Vessel Fabricator. The K350 design is approved by
> ABS, LLoyds etc. It has a proven track record (100+ built and put in
> service ?). Get a copy of Capt. George Kitteridge's book " I found
> Israel's Atom Bomb Factory " and read it.
> The 516GR70 steel that makes up the pressure hull from a per unit cost
> category is probably the cheapest part of the project.
> A completed Sub using your 4' x 12' cylinder would weigh somewhere in
> the range of 5 to 10 tons, Launching and retrieving will be a real
> challenge unless you have a large trust fund.
> Remember building the sub is only the first part, actually using it is
> the second part. Eventually you will get bored with diving near the
> boat ramp. You will want some type of a support vessel next.
> Submarines are not cheap, a K350 will cost around $30,000.00 doing
> most of the work yourself. (using new certified materials  and doing
> quality work).
> Turning the 4'x12' cylinder into a sub, my guess $100,000.00 .
> And last but not least Safety, If your not using pressure vessel
> quality steel you will be risking your life.
> My 3 cents worth,
> Dan Lance
> 
>      From: Dj <swaircraftsupply@yahoo.com>
>      Reply-To: personal_submersibles@psubs.org
>      Date: Tue, 22 Jun 2004 06:08:50 -0700 (PDT)
>      To: personal_submersibles@psubs.org
>      Subject: [PSUBS-MAILIST] Starting my sub
> 
>      I guess it's my turn , I never thought this day would come a
>      friend of mine was cutting up some scrap iron from his fab
>      yard and he was just about ready to lay waste to a beautiful
>      4' x 12'  tank in perfect condition and of course I asked if
>      I could have it. Well I have the tank now but I have a
>      problem all of this seemed so easy when it was dream, now
>      that its all real I am stuck on stupid, So can someone point
>      me in the right direction until I get over the shock that I
>      have started to build my own sub. from what I understand you
>      take the dia 4' squared x .7854 x L    L=12'   =   150.7968
>      CF   x  62.4 lbs = 9409.72032 llbs of water displacement  --
>      2.500 lbs this is how much the tank weigh  = 7088lbs and
>      this would be the weight that I would have to meet in order
>      for the sub to sink ?
>      and how do you calculate-how deep you can go and stiffeners
>      needed.
>      Thanks.
>      Deric from
>      Lancaster,CA
>      ------------------------------------------------------------
> 
>      Do you Yahoo!?
>      Yahoo! Mail
>      <http://us.rd.yahoo.com/mail_us/taglines/50x/*http://promotions.yahoo.com/new_mail/static/efficiency.html>
>       - 50x more storage than other providers!




************************************************************************
************************************************************************
************************************************************************
The personal submersibles mailing list complies with the US Federal
CAN-SPAM Act of 2003.  Your email address appears in our database
because either you, or someone you know, requested you receive messages
from our organization.

If you want to be removed from this mailing list simply click on the
link below or send a blank email message to:
	removeme-personal_submersibles@psubs.org

Removal of your email address from this mailing list occurs by an
automated process and should be complete within five minutes of receipt
of your request.

mailto:removeme-personal_submersibles@psubs.org

PSUBS.ORG
PO Box 311
Weare, NH  03281
603-529-1100
************************************************************************
************************************************************************
************************************************************************