----- Original Message -----
Sent: Friday, May 07, 2004 7:34 AM
Subject: RE: [PSUBS-MAILIST] VBT (MBT)
Revisited Idea
About 2 years ago,
or some thing like that. I posted
an idea that may help this Ballast Thing regarding home builds. It?s dirt simple and cures a few
problems. The idea: Two tubes with a slot cut in them from
one end to the other. A tube on
either side of the sub. When you
want to reduce ballast you just turn the tube and let out some air. When you want to go back up,,,you just
rotate the tube so that the slot is back down a little bit, and add some
air. But the tubs create an
automatic and infinitely Variable ballast system. It?s also very easy to build. There are several ways to put the air
inside and to rotate the tubes and your imaginations can come up with good
ones. But the concept is a good
one and would work. And if one
sets the tube so that the slots are at a cretin point in rotation then that
becomes the variable ballast. It
also eliminates valves to let out air for the ballast system to operate.
Things happen very slow down there and if one is traveling at even one knot
the speed seems to be about right.
At 3 knots one starts looking for the break pedal. DJB
Do you Yahoo!?
Win
a $20,000 Career Makeover at Yahoo! HotJobs